ShadeX / visual reference

See the part.
Check the label.

Recognizable source images, plain-language purpose, and the limits of what each image tells us. Tap any image to open the original photograph and zoom.

Reference, not installation approval. These are seven real photographs of supplied manual pages plus one manufacturer bracket drawing, not installed-job photos. Match the exact equipment label before using a procedure. Missing or different label? Keep the identity unconfirmed.
Weather sensor

DD118B wind-and-sun sensor

This sensor monitors wind and sunlight. The cover shows its wind cups, housing, controls, and display so you can compare the shape and label.

Original photographed DD118B wind-sun sensor manual cover, Version A/05, with sensor and control illustrations
Manual photograph · printed Version A/05 · SX-PHOTO-08
Open full-size photo ↗

Recognize the sensor; do not infer motor compatibility or safe wind thresholds from appearance alone.

Sensor companion page

Mounting & compatibility illustrations

The DD118B companion face shows mounting orientations and examples of equipment around the sensor. Use it to locate the right reference, not to assume every pictured combination fits your system.

Original DD118B companion manual photograph with compatibility illustrations and mounting orientation diagrams
Manual photograph · SX-PHOTO-07 · revision not printed on this face
Open full-size photo ↗

Printed wind-speed examples are not a recommended safe operating threshold for a particular shade.

Handheld remote

DD1602H 15-channel emitter

“Emitter” means the handheld remote. This page shows its front and back. DD1602H identifies the remote, not the motor inside the shade.

Original manual page 3 photograph showing DD1602H 15-channel remote front and back diagrams
Manual photograph · page 3 · SX-PHOTO-05
Open full-size photo ↗

The motor model and manual revision are not established by this page. No programming sequence is validated here.

Shade mounting hardware

Left & right bracket assemblies

These hold the shade at its ends. Each assembly combines a shade bracket and a mounting bracket. Left and right are different: compare both with the complete guide.

Lutron manufacturer line drawing of left and right shade bracket assemblies
Lutron Serena Open Roll SYERJ-B-A-C only · document 04599321 Rev A · page 1
Enlarge bracket drawing ↗

Manufacturer diagram rendered from retained manual. Not a scale, fastener-selection, compatibility, or QSPS identification reference.

Unidentified motor manual / source archive

Travel limits & preferred stop

A travel limit is where the shade stops. A preferred position is an additional saved stopping point. This photographed page covers these settings; its motor identity is unconfirmed.

Original unidentified motor manual photograph, page 4
Supplied manual photograph · printed page 4 · identity not established
Open full-size page ↗
Unidentified motor manual / source archive

Remotes, erase functions & motor modes

This page includes adding remotes and destructive erase functions. It is preserved as source material, not a universal recipe. Do not erase limits or remotes on unidentified equipment.

Original unidentified motor manual photograph, page 5
Supplied manual photograph · printed page 5 · identity not established
Open full-size page ↗
Unidentified motor manual / source archive

Return, repeater & stall behavior

This page describes model-dependent motion and signal features. Protection behavior cannot be assumed for your motor; identify the equipment and use its complete manual.

Original unidentified motor manual photograph, page 6
Supplied manual photograph · printed page 6 · identity not established
Open full-size page ↗
Unidentified motor manual / source archive

Troubleshooting & quick index

A photographed index and symptom table. The index abbreviates the repeater sequence: consult full page 6 rather than relying on the shortcut. Motor model and revision remain unknown.

Original unidentified motor manual photograph, page 7
Supplied manual photograph · printed page 7 · identity not established
Open full-size page ↗

Still needed: actual field-part photos

These pages do not complete the field photo library. QSPS power-supply variants, installed mounting details, and other requested hardware still need correct, source-verified photographs. No unrelated image has been substituted for them.

Manufacturer reference

Lutron Serena Open Roll SYERJ-B-A-C: the manufacturer guide includes left/right bracket assembly drawings. This is a model-specific diagram, not a QSPS power-supply image.

Open Lutron guide ↗

Check the model and revision in the guide you open. External documents may change.